羊皮纸论坛

羊皮纸论坛

分享让知识传播,阅读让心灵成长, 创作让文化传承,让我们共同努力。
  • 禁止广告文
  • 知识传播
  • 阅读
  • 心灵成长
  • 创作
  • 文化传承
羊皮纸论坛目录 / 个人电脑 / Linux 讨论版 /

Linux 和 Windows 共享交换区

发表新主题
随机主题
上个主题
下个主题
|
Linux 和 Windows 共享交换区

本文出自:http://www.linuxforum.net 作者: 马军 (Arthur Ma)

    1. 前言
    现在,越来越多的人在一台使用Linux 和 Windows. 这应该说是Linux的 利. 我们知
    道, Linux 要使用交换分区,
    Windows 要使用交换文件。如果一台PIII, 有192M 内存,我们分配给Linux 192M 交换
    区, Windows 2000 至少要
    200M. 那,我们要用近400M硬盘空间。如果交换区更大,浪费就更可观了。
    由两个系统的交换区都只是运行时的临时数,所以,我们采用动态修改分区信息的方法
    来达到共享目的.

    2. 方法简介
    1). 备份Windows 分区信息。
    2). 当启动Linux时, 将该分区做成Linux 交换区,并将其激活。
    3) 当Linux 关闭时,将该分区重新变成Windows 交换区。

    3. 具体步骤
    1). 分区
    Fdisk, 只分主分区, 不分扩展分区
    2). 安装 Windows.
    3). 安装Linux (占一个主分区)
    4). 在Linux 下, 分扩展分区)
    5). 设定Linux交换区(假定/dev/hda10)
    6). 建立winswap 设备
    ln -s /dev/hda10 /dev/winswap
    7). 启动Linux, 关闭交换区
    # swapoff -a
    8). 从文件安装表中删除该分区
    vi /etc/fstab
    注释掉该行 (/dev/hda10)
    9). 将该分区该成 FAT16 或其他 DOS 分区.
    10). 启动 Windows
    a). 格式化该分区
    b). 将系统的交换文件设在该分区.
    11). 启动 Linux, 计算Total Special Sectors
    公式:
    T = r + (s * f) + (d / 16)
    参数:
    Reserved Sectors at beginning : r
    FAT Copies : f
    Sectors per FAT : s
    Root directory entries : d
    参见: msinfo.sh
    注解: 可以运行 msinfo.sh 来获得.
    # msinfo.sh /dev/hda10

    12). 备份Windows 分区信息
    # dd if=/dev/winswap bs=512 count=XXX | gzip -9 > /etc/winswap.gz
    这里, XXX = T
    14). 编写启动, 退出脚本, 并把它们放在 /etc/rc.d/xxx.
    可用 grep -nr * | grep swapon (或 swapoff) 来找系统激活和关闭交换区, 将它们
    替换称我们
    的脚本)
    我们在附录中提供了启动和关闭的脚本.
    4. 附加说明
    1. 本文使用的是FAT16, 如果使用NTFS 或其它, 必须修改脚本.
    2. mkswap /dev/winswap 377496 (这个值需要修改, 依照你的分区大小)

    5. 参考资料:
    Linux HOWTO: Swap-space

    6. 附录 -- 相应的脚本
    1. msinfo.sh 脚本
    #!/bin/sh
    #
    # msinfo.sh This shell script displays the boot sector of the
    # given partition.
    #
    # Author: Rahul U. Joshi
    #
    # Modifications Removed the use of expr and replaced it by the let
    # command.


    # check for command line arguments
    if [ $# -ne 1 ]; then
    echo "Usage: msinfo "
    exit 1
    fi

    # check whether the input name is a block device
    if [ ! -b $1 ]; then
    echo "msinfo: $1 is not a block device"
    exit 1
    fi

    # create two temporary files for use
    TMPFILE=`mktemp -q /tmp/$0.XXXXXX`
    if [ $? -ne 0 ]; then
    echo "msinfo: Can't create temp file, exiting..."
    exit 1
    fi

    TXTFILE=`mktemp -q /tmp/$0.XXXXXX`
    if [ $? -ne 0 ]; then
    echo "msinfo: Can't create temp file, exiting..."
    rm -f $TMPFILE
    exit 1
    fi

    back_title="`printf "%78s" "msinfo, Information about FAT16 filesystem --
    Rahul
    Joshi"`"

    dialog --title "Boot sector of $1" --backtitle "$back_title" --infobox
    "\nAnalysing boot sector for $1\nPlease wait ..." 14 60

    # truncate TXTFILE to zero length
    echo > $TXTFILE

    # get Formatting DOS version
    dd 2>/dev/null if=$1 bs=1 count=8 skip=3 | dd 2>/dev/null of=$TMPFILE
    printf >>$TXTFILE "%30s : %s\n" "Formatting DOS version" "`cat $TMPFILE`"


    # get file system
    dd 2>/dev/null if=$1 bs=1 count=8 skip=54 | dd 2>/dev/null of=$TMPFILE
    printf >>$TXTFILE "%30s : %s\n" "Filesystem" "`cat $TMPFILE`"

    # check if filesystem in a FAT16
    if [ "`cat $TMPFILE`" != "FAT16 " ]; then
    dialog --title "Boot sector of $1" --backtitle "$back_title" --infobox
    "\nCan't find a FAT16 filesystem on $1" 14 60
    exit 2
    fi

    # get volume label in boot sector
    dd 2>/dev/null if=$1 bs=1 count=11 skip=43 | dd 2>/dev/null of=$TMPFILE
    printf >>$TXTFILE "%30s : %s\n" "Volume label in boot sector" "`cat
    $TMPFILE`"

    # get Sector size
    dd 2>/dev/null if=$1 bs=1 count=2 skip=11| od -An -tdS | dd 2>/dev/null
    of=$TMPFILE
    printf >>$TXTFILE "%30s : %d\n" "Sector size" `cat $TMPFILE`
    sector_size=`cat $TMPFILE`


    # get Reserved sectors
    dd 2>/dev/null if=$1 bs=1 count=2 skip=14| od -An -tdS | dd 2>/dev/null
    of=$TMPFILE
    printf >>$TXTFILE "%30s : %d\n" " Reserved sectors" `cat $TMPFILE`
    reserved_sectors=`cat $TMPFILE`


    # get FAT sectors
    dd 2>/dev/null if=$1 bs=1 count=1 skip=16| od -An -tdS | dd 2>/dev/null
    of=$TMPFILE
    fat_count=`cat $TMPFILE`

    dd 2>/dev/null if=$1 bs=1 count=2 skip=22| od -An -tdS | dd 2>/dev/null
    of=$TMPFILE
    sectors_per_fat=`cat $TMPFILE`

    # calculate the no of sectors allocated for FAT's
    let fat_sectors=fat_count*sectors_per_fat

    printf >>$TXTFILE "%30s : %u (%u x %u) \n" "FAT sectors" "$fat_sectors"
    "$fat_count" "$sectors_per_fat"


    # get root directory sectors
    dd 2>/dev/null if=$1 bs=1 count=2 skip=17| od -An -tdS | dd 2>/dev/null
    of=$TMPFILE
    root_sectors=`cat $TMPFILE`

    # calculate the no of sectors allocated for root directory
    let root_sectors=root_sectors*32/sector_size

    printf >>$TXTFILE "%30s : %u\n" "Root directory sectors" "$root_sectors"


    # get Total special sectors
    let total=reserved_sectors+fat_sectors+root_sectors
    printf >>$TXTFILE "%30s : %u\n" "Total special sectors" "$total"

    # display the information in a message box
    dialog --title "Boot sector of $1" --backtitle "$back_title" --msgbox
    "`cat $TXTFILE`" 14 60

    # delete temporary files
    rm -f $TMPFILE
    rm -f $TXTFILE

    # end of msinfo.sh

    2. swapinit.sh
    #!/bin/sh
    #
    # /etc/rc.d/init.d/swapinit.sh - activate the swap partition
    #
    # written by Rahul U. Joshi
    # Verify and initialize swap space
    #

    echo -n 'Verifying swap space... '

    loopcount=0

    # flag to indicate whether the partition has been activated or not
    activated=0

    # check for signatures 6 times before giving up
    while [ $loopcount -lt 6 ]
    do
    if [ "`/bin/dd 2>/dev/null if=/dev/winswap bs=1 count=10 skip=4086`" =
    'SWAPSPACE2' ]; then

    echo "Linux signature found, iteration $loopcount"
    echo "Activating swap partitions"
    swapon /dev/winswap
    activated=1
    break

    elif [ "`/bin/dd 2>/dev/null if=/dev/winswap bs=1 count=5 skip=54`" =
    'FAT16' ]; then
    echo "DOS signature found, iteration $loopcount"
    echo "Making swap partition"
    mkswap /dev/winswap 377496
    echo "Activating swap partitions"
    swapon /dev/winswap
    activated=1
    break

    else
    let loopcount=loopcount+1
    fi

    done


    if [ $activated -ne 1 ] ; then
    echo "Swap signature not found after $loopcount tries"
    echo "No swapping partitions activated"
    exit 1
    fi

    3. swaphalt.sh
    #!/bin/sh
    #
    # /etc/rc.d/init.d/swapinit.sh - activate the swap partition
    #
    # written by Rahul U. Joshi
    # Verify and initialize swap space
    #

    echo -n 'Verifying swap space... '

    loopcount=0

    # flag to indicate whether the partition has been activated or not
    activated=0

    # check for signatures 6 times before giving up
    while [ $loopcount -lt 6 ]
    do
    if [ "`/bin/dd 2>/dev/null if=/dev/winswap bs=1 count=10 skip=4086`" =
    'SWAPSPACE2' ]; then

    echo "Linux signature found, iteration $loopcount"
    echo "Activating swap partitions"
    swapon /dev/winswap
    activated=1
    break

    elif [ "`/bin/dd 2>/dev/null if=/dev/winswap bs=1 count=5 skip=54`" =
    'FAT16' ]; then
    echo "DOS signature found, iteration $loopcount"
    echo "Making swap partition"
    mkswap /dev/winswap 377496
    echo "Activating swap partitions"
    swapon /dev/winswap
    activated=1
    break

    else
    let loopcount=loopcount+1
    fi

    done


    if [ $activated -ne 1 ] ; then
    echo "Swap signature not found after $loopcount tries"
    echo "No swapping partitions activated"
    exit 1
    fi
  • 关键字 : TMPFILE, winswap, loopcount, count, TXTFILE, activated, msinfo, sectors, printf, FAT16, sector, partition, Linux, signature, partitions, found, swapon, space, root_sectors, check
0 0
2009-01-21T08:53:53+0000


  • 当您未登入羊皮纸时,可以利用脸书 Facebook 登入来发表回响。若使用羊皮纸会员身份发表回响则可获得经验值及虚拟金币,用来参加羊皮纸推出的活动。
发表回响
 
验证字串

Facebook 粉丝专页

QRCode 条码 & APP 连结

说明
本页网址

在相关服务标签中,『扫描条码,在行动装置』或是『点击连结按钮,在本装置』中开启网页或是 APP 相关操作。
QRCode